Easter basket tutorial and Cup Winners

Good Morning, hope everyone had a good weekend and saw a bit of the lovely sunshine we had here in the Fens, it was really beautiful and Sunday quite warm as there was little or no wind.

Before I can talk craft I have to share a picture of the boys after our win at Wembley yesterday, it was something of a nail biter going to extra time and then penalties, but we got there in the end and are assured of  European footie next season, not to mention another trophy in the cabinet at Anfield. For those of you totally lost and not as mad and fanatical about footie as I am, I mean Liverpool FC !!

Silliness over, on to some craft and I thought I would share one of the little Easter baskets I have been making, the inspiration actually came from a demo I saw on TV for a rather expensive score board and it got me thinking I could probably come up with something similar using my cheapie MDF board which I've had for yonks and hey presto it worked a treat, so here is my take on the basket.

It's a really basic design and I am sure most of you can suss it out for yourself, but just in case I've done a few photos with sizes to help. Above is what I used for mine, one sheet of A4 linen cardstock, I 12x12 sheet DP, some ribbons, Copics, Aquamarkers, scoring tool four eyelets, Nesie and stamp for the image which is Penny Black 2665K Blush and I also used Adirondack raspberry for the main part of the flower.

Start by cutting the A4 sheet of card down to a 21cm square  and score in both directions at 7cm intervals so your piece is divided into nine equal squares, the score the four corner squares diagonally as above. Crease all scored lines and you will see the shape of the basket coming together. The four diagonal corners scores need to be carefully folded inwards.

Next cut 17 - 6.5x6.5cm squares from the sheet of DP, leave 9 whole and cut the other eight in half diagonally, then stick all into place as below. Both sides will look the same with just one centre square blank, that will be your base.

Note: the basket in the picture at the top was my prototype and I didn't cover the folded in flaps, so if you prefer to do it that way to get some contrast you will only need nine of the 6.5cm squares and they won't need cutting in half as you will only be covering the whole squares, five inside and four on the outside.

Stamp your image four times and cut out with a Nestie, I then ran a Copic round the edge rather than matting and layering so as not to add too much weight. Stick on the four outer squares.......make sure you get them the right way up and not upside down as I did on my first attempt !!

Finally pop an eyelet into each of the four corners, draw the basket up into shape and thread ribbon through the eyelets. And walla, you have a pretty little basket to fill with goodies. I will share this pink and green version another day.

And of course you can change the size to larger or smaller, all you need to remember is that your chosen size will divide evenly by three so you get nine equal squares.